Koi Ponds for Backyard? Here is How to Own One

Owning a bright blue pond in the backyard is a dream for some and a routine for others. If you don’t know where to start and what to do, sit back for a quick rundown of the pond-building process.

1. Choose The Right Area Where The Pond Will Be Dug Up

When picking a spot to build a pond, you should consider certain factors:

  • Choose a wide area that’s free of excess vegetation.
  • Also, pick a spot that will receive enough sunlight to help grow the plants you’ll be putting.
  • Choose a spot that doesn’t impact or gets impacted by running water, especially after rain.
  • Pick an area with a fair bit of shade to prevent excess sunlight and evaporation.

2. Estimate the Size and Shape of the Pond

This is where the type of fish you’re rearing comes into play. For a Koi pond in your backyard, it’s advised you dig up a pond that’s at least 4ft in depth. This is to ensure that the water isn’t too shallow, so you don’t run the risk of having a frozen pond during winter.

3. Dig Up The Hole

Once you’ve decided on the specifications of your pond, you should begin digging. One useful tip is to ensure your edges are even and the surface you’re building the pond on is flat and uniform. You can mark the corners of the area you’re digging to make tracing easier.

By the way, if you’re not up for a digging exercise, you can seek professional assistance from trusted garden pond builders for a quick and well-done process.

koi pond

4. Bottom Drainage

Once you’ve dug up your pond, you should install a tube that will be used for removing trash and debris. It’ll serve as your pond drainage system and should be done using a pipe that’ll be covered with a net, or your fish will get sucked in too.

5. Install the Pump and Fountain

Next comes your water source. A pipe of at least an inch is combined with a water pump to create the water source. For quick and efficient distribution of water, place the pump at the centre of the bottom of the pond.

It’s also important to get a water pump filter that’ll be fixed after installation.

6. Install the Pond Liner

After settling the water drainage, you need a liner to overlay the pond. This step is crucial for ensuring your pond retains water. The liner should be well tucked in every nook so there’s no leakage and the watercourse is well set.

7. Install Eduction Jets And Skimmer

Final touches here and these are very important. The eduction jet is what creates the current in the pond to prevent stagnant areas. On the other hand, a skimmer is more or less a fish bucket that makes it easier to gather fallen debris off the surface of the water.

Once you’re done installing both, it’s time to welcome your fish and other aquatic creatures into your new pond.

Bottom Line

The digging and installation part aren’t the only crucial steps to owning a backyard pond. You also need to channel the same energy into caring for it. Regular inspection, cleaning, water change, fish feeding, and so on are must-dos to keep your backyard pond looking great.