In order to increase the warmth and improve the light inside your home, you may consider floor sanding and polishing. Polishing the floor in an apt manner may add fashion if done in the right manner. You should do sanding before polishing the floor. If sanding is not done properly, polishing will highlight imperfection. Sanding the timber floor is not at all a difficult task and you may consider doing it yourself. Irrespective of whether you do the floor sanding and polishing or hire an expert, there are certain important steps that you need to follow. If the floor is beautifully sanded or polished, it can enhance the overall appeal of the space. It may breathe new life into the home and make it beautiful. The do-it-yourself method can appear to be a straightforward process but it is challenging at the same time. You need to manage the entire process in a careful manner. In the process, you may end up making costly mistakes.

floor sanding

Top Things To Consider

Prior to polishing the floor, you will need to carefully prepare it. A thorough sanding of the surface is required. The first and foremost step here would be to vacuum the surface and check the overall surface and nails that will be used. The nails must stick to the floor properly. If you find the nails sticking out, you may hammer them back. The Second step would be taking off the old coating or polish. After you prepare the floor, sanding has to be done to even out the surface. First, you will use coarser sandpaper and finally use finer sandpaper. After you have sanded the floor properly, it gets buffed and you may start polishing or sealing the floor.

floor polishing

The Various Steps to Floor Sanding and Polishing

If you are looking for essential tips for floor sanding and polishing, you may follow the steps mentioned below:

  • You need to get rid of roughness, coarseness and previous coating from the floor. You may use a belt sander, drum sander and use a range of other sandpapers.
  • To choose apt sandpaper, you can use the sandpaper after measuring its coarseness by grit. If the grit is lower, it means that its coarseness is more. First, you need to use sandpaper of 40-grit and finally move to use 80grit sandpaper. If the floor is too rough, you may use sandpaper of 24-grit.
  • Take a belt sander and smooth out the areas. After this, you will also find that there are certain areas that cannot be accessed by belt sander, and so you can use circular sanding disk carrying the diameter of 18 centimetres. But still, circular sanding disk will not be able to reach the corners. So, again you have to use a scraper or triangular sanding machine. Use Orbital Sander and follow this up with 120-grit sandpaper. All the scratches resulting from sandpaper will be removed.
  • Use a vacuum cleaner to get rid of the dust during floor sanding and polishing.
  • Use a brush and seal the floor edges. Apply the coating and even out with the help of a roller. Use a rolling tray to apply the coat while also work along the grain.
  • Now take orbital sander featuring 120-150 grit paper in order to eliminate the floor roughness. This will eliminate roughness due to coating. After you finish applying one coat, you must wait for 8-10 hours prior to applying the next few coats.
  • When you are polishing timber floor, you should wear proper safety gears like a dust mask, ear muffs and breathing mask. So, you will be saved from inhaling dust and fumes.

The task of floor sanding and polishing is not very easy. If you want you can get in touch with a professional for this. You may expect a variety of services from the floor experts who would adopt the best technique for floor sanding and polishing.