It’s the middle of winter and your furnace is frozen. What do you do?
Don’t worry, we’re here to help. Today’s informative blog post will walk you through all of the steps you need to take if your furnace is frozen. Today’s post will also give you some tips that you can use to avoid similar issues from popping up in the first place.
So, read on for all the information you need to know about dealing with a frozen furnace!
If you need furnace repairs in Colorado, you need to contact a reputable HVAC company. The best HVAC companies can identify any HVAC issue that’s affecting your furnace.
If your furnace is frozen, don’t panic!
It can be worrying to see frost or ice on your furnace, but it’s usually not a sign of a major problem. In most cases, a frozen furnace is simply the result of a build-up of condensation. When warm air from your furnace comes into contact with cold surfaces such as walls and windows, the water in the air condenses and forms droplets of water.
Over time, these droplets can freeze, causing ice to build up on your furnace. Thankfully, there are a few simple steps you can take to thaw a frozen furnace.
Turn off the furnace unit and call a technician
If your furnace is frozen, it’s important to take action immediately. First and foremost, you need to turn off your furnace’s power. Then, set a space heater near the furnace and open all doors and windows in the area to improve ventilation.
Once the ice starts to melt, you’ll need to call a technician to come and repair the furnace. In the meantime, you’ll want to keep an eye on the space heater and make sure that it doesn’t overheat or start a fire. With proper care, you can prevent your furnace from freezing again in the future.
Check the filters and evaporator coil
Frozen furnaces are not uncommon during the winter months. If your furnace is frozen, you should check the filters and make sure they’re clean. Clogged or dirty filters can restrict air flow, causing the furnace to overheat and eventually freeze. If the filters are clean, then the next step is to thaw the ice using a hairdryer or other heating element.
Once the ice has melted, you should be able to turn on the furnace and resume normal operation. However, if the problem persists, then it’s time to call a professional. A licensed technician will be able to diagnose and fix the problem, ensuring that your furnace stays up and running all winter long.
Keep the doors to the area where the furnace unit is located open
It can be quite worrisome when you go to turn on your furnace unit for the first time during the winter and discover that it’s frozen. However, there are numerous things that you can do to fix the problem. One of the best techniques is keeping the doors to the room where the furnace unit is located open.
Doing this will help circulate the air and thaw the ice. You can also try turning up the thermostat to help speed up the process. If these measures don’t work, you may need to call a professional to take a look at your furnace.
Wrap towels around the pipes leading to and from the furnace
If the above-mentioned tips don’t work, you can try wrapping some of your pipes with towels.
To do this, you’ll need to locate the frozen pipes leading to and from the furnace. Once you’ve found them, wrap them in towels soaked in hot water. Doing this will help to thaw the ice and get the water flowing again.
Next, turn on the furnace and set it to “emergency heat.” This will bypass the frozen component and allow the furnace to warm your home until the ice is melted. Finally, check the filters and vents to make sure they are not blocked.
Pour hot water over the frozen pipes to melt the ice
One of the most common wintertime plumbing problems is a frozen pipe. This can be caused by a number of factors, such as cold weather or a sudden drop in temperature. If you suspect that your furnace is frozen, there are a few things you can do to thaw it out.
First, pour a pot of hot water over the frozen area. This will help to melt the ice and allow the water to flow through the pipe. You can also use a hair dryer to thaw the pipe, but be careful not to overheat it.
Once the ice has melted, you should turn on your furnace and let it run for a few hours to warm up the pipes. If your furnace is still not working, call a plumber for assistance.
What should I do if my furnace is frozen? — Conclusion
Trying to thaw out a frozen furnace on your own can be dangerous, so it’s always best to leave it to the experts.
Have you ever dealt with a frozen furnace? What was the outcome?
