All You Need To Know About Radon:
Radon is a natural form of radioactive gas that forms from uranium, thorium, or radium. Radon does not have any type of odor, color, and taste. It is the second-largest root of lung cancer. People are more exposed to radon because it can be found anywhere in the air form. Basically, when uranium disintegrates in the soil, it builds radon particles that escape through cracks, pipes, or drains into the building.
Can You Detect Radon?
It is not easy to detect radon because you can’t see it. It travels through soil and air. Even if your building is radon-free, you are not completely out of reach from this harmful gas. It may be possible that your neighbors or your surrounding buildings do have radon particles. You are continuously exposed to this harmful radon gas.
However, you can have your home tested by a qualified professional contractor to determine the level of radon in your home. They do the radon testing of your house to know the exposure level of gas. Testing is one of the easy and cost-effective methods to know the condition of your house or office. But if you don’t want to hire the contractor, you can buy your own radon test kit and do the testing yourself. Radon testing kits come with proper instructions and manuals to make your job easier.
Radon Mitigation System
A radon mitigation system is the composition of the steps designed to reduce the level of radon concentrated inside the building. Radon is found in the air as well as in water, so mitigation testing is done to know the exact level of radiation. All buildings or houses are different from each other; therefore, it is advisable to hire a qualified contractor that will look into your house needs. They suggest the method which works best for your house. There are various ways of radon reduction. There are techniques that prevent the entry of radon into your home, while others are used to reduce the level of radon when it is already entered in your home.
How Is The Radon Mitigation System Installed In Your Home?
Installing the radon mitigation system requires the proper knowledge of plumbing, electric work, and roofing. You can get rid of radon through suction and evacuation of radioactive gas.
Mentioned below are the steps included in the mitigation system:
Step 1: You need to make a hole in the basement slab; it should be wide enough to endure a 3-inch pipe.
Step-2: Dig the small pothole below the slab by using a drill machine. If you find gravel, then dig a small hole, but if you find dense soil, you need to dig a larger pit that will increase the suction area.
Step-3: Make a path to install a 3-inch pipe through the house up to the attic.
Step-4: Seal all the joints of all the pipes.
Step-5: Install a fan in the attic. Then connect the pipe to the fan using an outlet for the plug. Do insulation around the pipe to minimize condensation.
Step-6: Install a manometer to know that your system is working.
Step-7: The last step is to test the running of the system. Dig the small holes in the basement to test the suction process. Check if your system is working effectively and after verifying, fill the holes with cement.
Benefits of installing Radon Mitigation System
You should consider installing a radon mitigation system in your home to live a healthy living. By addressing this problem and adopting cost-effective solutions, you can reap the various benefits that will help you in the very long run:
- The main benefit is you can reduce the risk of lung cancer.
- You will get effective results within a day or two after installing the radon system.
- Installing a radon system will reduce the humidity level in the basement of your house because these systems are constantly reducing the infiltration from moist soil air.
- It will also increase the value of your home when you put your house on the market.
I hope this article is able to guide you all about the basics you need to know about radon and mitigation systems and how you can install them within the budget and enjoy the benefits for a long period of time.